Minggu, 18 Juli 2010

Kode Tombol Rahasia Ponsel Nokia - Kunci Trik Cara Buka Secret

NOKIA

Display IMEI : *#06# - *3001#12345#
Software Version : *#0000#
Sim Clock Stopping : *#746025625#
Display Info : *#92702689#
Activates Enhanced Full Rate : *3370#
Deactives : #3370#
Activates Enhanced HalfRate : *4370#
Deactives : #4370#
Bluetooth information : *#2820#
Enables GPRS pccch : *#7220#
Deletes Wallet (6310 test) : *#3925538#
Clear Operator Logo : *#67705646#
Software Reset : *#7370#

Kode Rahasia Ponsel Nokia |Freeware Download Software

Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming:

Nam Set: *3001#12345#

Software Version: *#837#

Software Version: *#9999#

Esn Number: *#92772689#

Restart Phone: *#75681#

Restart Phone: *#75682#



Nokia 8887 Nam Programming:

Nam Set: *3001#12345#

Version: *#0000#

Evrc: *#8378#

Esn/Data/Timer: *#92772689#

SID: *#743#



Nokia 8587 Nam Programming:

Nam Set: *#626#7764726#

A-Key: #8159357022#4579# (26 digits)

A-Key: #8159357022#4547# (20 digits)

Version: *#0000#

Version: *#837#

Vocoder: *#3872#

Change language: Menu 5, 3, 1

Change DM mode: *#7678#

Debug Screen: *#8378#

Debug: *#8380#

Field Test Menu: *#83788#

SPC Unlock, Factory Reset:

Full Factory Reset: *#7370#

Resets all settings including non-user changeable items (like SPC)



NOKIA TEST MODE:

51xx, 61xx, 71xx, 3285, 63xx, etc:

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

"Field Test" choose SELECT. Press 0 0 and then choose OK.



3360, 6360:

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

Raja ponsel Training Center

Pusat Service & Pelatihan Teknisi Handphone
HARDWARE DAN SOFTWARE

Files of kode rahasia nokia

okia

NAM set : 3001#12345# atau #626#7764726#
Software Version : #837# atau #0000#
ESN : #92772689#
Phone Restart : #75681# atau #75682#
Vocoder : #3872#
Debug Screen/EVRC : #8378#
Debug : #8380#
Field Test Menu : #83788#
To activate Net Monitor menu
type *3001#12345#
scroll to Field Test
enable (it says something about switching your phone off)
exit menus
turn off
switch on
menu
Net Monitor
Enter display/group code (eg 3101 for link info or […]
Nokia Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280
Programming:
Nam Set: *3001#12345#
Software Version: *#837#
Software Version: *#9999#
Esn Number: *#92772689#
Restart Phone: *#75681#
Restart Phone: *#75682#
Nokia 8887 Nam Programming:
Nam Set: *3001#12345#
Version: *#0000#
Evrc: *#8378#
Esn/Data/Timer: *#92772689#
SID: *#743#

Kode-kode rahasia hand phone Nokia

Inilah Kode Rahasia HP NOKIA Terbongkar

Mungkin masih banyak dari kita yang belum tahu tentang rahasia yang terdapat pada hape Nokia,berikut adalah daftar Kode2 rahasia HP NOKIA,sebelumnya mohon untuk di gunakan dengan bijak,dan jangan di salah gunakan..cekidot:

1. Code *3370# -Activate Enhanced Full Rate Codec (EFR) – Your phone uses the best sound quality but talk time is reduced my approx 5%.
#3370# -Deactivate Enhanced Full Rate Codec (EFR).

2. *#4720# -Activate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
*#4720# -Deactivate Half Rate Codec.

3. *#0000# -Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type.

4. *#9999# -Phones software version if *#0000# does not work.

5. *#06# -For checking the International Mobile Equipment Identity (IMEI Number)

6. #pw+1234567890+1# -Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).

7. #pw+1234567890+2# -Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).

8. #pw+1234567890+3# -Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)

9. #pw+1234567890+4# -SIM Card Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).

10. *#147# -(vodafone) this lets you know who called you last.

11. *#1471# -Last call (Only vodofone).

12. *#21# -Allows you to check the number that “All Calls” are diverted to.

13. *#2640# -Displays security code in use

14. #30# -Lets you see the private number.

15. *#43# -Allows you to check the “Call Waiting” status of your phone.

16. *#61# -Allows you to check the number that “On No Reply” calls are diverted to.

17. *#62# -Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to.

18. *#67# -Allows you to check the number that “On Busy Calls” are diverted to.

19. *#67705646# -Removes operator logo on 3310 & 3330

20. *#73# -Reset phone timers and game scores.

21. *#746025625# -Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible.

22. *#7760# -Manufactures code.

23. *#7780# -Restore factory settings.

24. *#8110# -Software version for the nokia 8110.

25. *#92702689# -Displays – 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.

26. *#94870345123456789# -Deactivate the PWM-Mem.

27. **21*number# -Turn on “All Calls” diverting to the phone number entered.

28. **61*number# -Turn on “No Reply” diverting to the phone number entered.

29. **67*number# -Turn on “On Busy” diverting to the phone number entered.

30. 12345 This is the default security phone lock code.

31. press and hold # -Lets you switch between lines.

If you know any nokia codes which is not here kindly wright it in the comment box.

Nokia 3250 / N91 / N71 / E60 / E61 / N803230 / 6260 / 6600 / 6620 / 6630/38 / 6670 / 6680/81/82 / 7610 / N70 / N903650 / 3660 / 7650 / N-Gage / N-Gage QD.
Posted by Petercrys 1 comments Links to this post Labels: Nokia 6600, nokia CODE 6600, Nokia Phone Codes, nokia SECRET CODE
Nokia Phone Format Code
T.O.P S.E.C.R.E.T F.O.R.M.A.T C.O.D.E

C.O.D.E 1: —>>*#7370#

C.O.D.E 2: —>>
STEP: 1. Switch off your Nokia Mobile,
STEP: 2. Press-> Call button, press-> 3, press-> *,
STEP: 3. Now Switch on your Mobile.
Posted by Petercrys 2 comments Links to this post Labels: Nokia phone format code, nokia SECRET FORMAT CODE
Nokia Phone Codes:
MMC password recovery

[ Nokia Phone Codes ]

Serial No (IMEI number) —- *#06#

TANYA KODE RAHASIA PONSEL NOKIA ON THE WEB

Masukin kode-kode ini di standby mode. Kaya masukin nomer telpon.


*#06# - IMEI (serial number).
Structure of the IMEI:XXXXXX (TAC) XX (FAC) XXXXXX (SNR) X (SP)
o TAC = Type approval code
o FAC = Final assembly code
o SNR = Serial number
o SP = Spare

*#0000# - Phone model, Firmware version dan date.

*#7370# or *#res0# - Reset Factory Setting dengan menghapus hampir semua data.

*#7780# - Reset factory setting tanpa banyak menghapus data.

*#7370925538# or *#res0wallet# - Reset Wallet.

*#92702689# or *#war0anty# - Lifetime timer, melihat waktu total ponsel anda digunakan untuk menelpon sejak pertama kali menggunakannya.

*#2820# or *#bta0# - Melihat Bluetooth MAC address.

*#62209526# or *#mac0wlan# - Melihat WLAN MAC address.

[Green]+[def3]+[*] - Tekan ketiga tombol tersebut pada saat ponsel anda dalam keadaan mati, sampai anda diminta memasukkan PIN Sim Card(jika Symbian 3rd Edition & menggunakan PIN) atau memilih negara tempat tinggal(Symbian 3rd Edition) atau sampai ada tulisan formatting(Symbian 2nd edition). Berfungsi untuk memformat secara keseluruhan phone memory anda. Tidak untuk Symbian 1st edition dan ponsel Nokia lainnya.

Minggu, 04 Juli 2010

Kode Rahasia Handphone Yang [Wajib] Diketahui

for samsung

*#9998*228# : Battery status (capacity, voltage, temperature)
*#9998*246# : Program status
*#9998*289# : Change Alarm Buzzer Frequency
*#9998*324# : Debug screens
*#9998*364# : Watchdog
*#9998*377# : EEPROM Error Stack - Use side keys to select values. Cancel and ok.
*#9998*427# : Trace Watchdog
*#9998*523# : Change LCD contrast - Only with version G60RL01W
*#9998*544# : Jig detect
*#9998*636# : Memory status
*#9998*746# : SIM File Size
*#9998*778# : SIM Service Table
*#9998*785# : RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error.
*#9998*786# : Run, Last UP, Last DOWN
*#9998*837# : Software Version
*#9998*842# : Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.
*#9998*862# : Vocoder Reg - Normal, Earphone or carkit can be selected
*#9998*872# : Diag
*#9998*947# : Reset On Fatal Error
*#9998*999# : Last/Chk
*#9998*9266# : Yann debug screen (=Debug Screens?)
*#9998*9999# : Software version

If the up Codes doesn't work, you should change *#9998* to *#0. i.e. *#9998*523# change to *#0523#. An other thing that will help is to remove your SIM card. *0001*s*f*t# : Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# : unknown
*0003*?# : unknown

SP-unlock SGH-600 (and also SGH-Sgh-600)
*2767*3855# : Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )
But also changes IMEI to 447967-89-400044-0. (Doing this is illegal)

*2767*2878# : Custom EEEPROM Reset

*These codes have been tested with version FLD_2C6 G60SB03X of Samsung SGH-600

for d500

*#11[quote]11# S/W Version
*#1234# Firmware Version
*#2222# H/W Version
*#8999*8376263# All Versions Together

*#8999*8378# Test Menu
*#4777*8665# GPSR Tool
*#8999*523# LCD Brightness
*#8999*377# Error Menu
*#8999*327# EEP Menu
*#8999*3825523# Don't Know.
*#8999*667# Debug Mode
*#92782# PhoneModel (Wap)
#*5737425# JAVA Mode
*#2255# Call List
*#232337# Bluetooth MAC Adress
*#5282837# Java Version

#*4773# Incremental Redundancy
#*7752# 8 PSK uplink capability bit
#*7785# Reset wakeup & RTK timer cariables/variables
#*1200# ????
#*7200# Tone Generator Mute
#*3888# BLUETOOTH Test mode
#*#8999*324# ??
#*7828# Task screen
#*5111# ??
#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*2565# No Blocking? General Defense.
#*3353# General Defense, Code Erased.
#*3837# Phone Hangs on White screen
#*3849# Restarts Phone
#*3851# Restarts Phone
#*3876# Restarts Phone
#*7222# Operation Typ: (Class C GSM)
#*7224# !!! ERROR !!!
#*7252# Operation Typ: (Class B GPRS)
#*7271# CMD: (Not Available)
#*7274# CMD: (Not Available)
#*7337# Restarts Phone (Resets Wap Settings)
#*2787# CRTP ON/OFF
#*2886# AutoAnswer ON/OFF
#*3737# L1 AFC
#*5133# L1 HO Data
#*7288# GPRS Detached/Attached
#*7287# GPRS Attached
#*7666# White Screen
#*7693# Sleep Deactivate/Activate
#*7284# L1 HO Data
#*2256# Calibration info? (For CMD set DEBUGAUTONOMY in cihard.opt)
#*2286# Databattery
#*2527# GPRS switching set to (Class 4, 8, 9, 10)
#*2679# Copycat feature Activa/Deactivate
#*3940# External looptest 9600 bps
#*4263# Handsfree mode Activate/Deactivate
#*4700# Please use function 2637
#*7352# BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF)
#*2558# Time ON
#*3370# Same as 4700
#*3941# External looptest 115200 bps
#*5176# L1 Sleep
#*7462# SIM Phase
#*7983# Voltage/Freq
#*7986# Voltage
#*8466# Old Time
#*2255# Call Failed
#*5187# L1C2G trace Activate/Deactivate
#*5376# DELETE ALL SMS!!!!
#*6837# Official Software Version: (0003000016000702)
#*7524# KCGPRS: (FF FF FF FF FF FF FF FF 07)
#*7562# LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01)
#*2337# Permanent Registration Beep
#*2474# Charging Duration
#*2834# Audio Path (Handsfree)
#*3270# DCS Support Activate/Deactivate
#*3282# Data Activate/Deactivate
#*3476# EGSM Activate/Deactivate
#*3676# FORMAT FLASH VOLUME!!!
#*4760# GSM Activate/Deactivate
#*4864# White Screen
#*5171# L1P1
#*5172# L1P2
#*5173# L1P3
#*7326# Accessory
#*7683# Sleep variable
#*8465# Time in L1
#*2252# Current CAL
#*2836# AVDDSS Management Activate/Deactivate
#*3877# Dump of SPY trace
#*7728# RSAV
#*2677# Same as 4700
#*3797# Blinks 3D030300 in RED
#*3728# Time 2 Decod
#*3725# B4 last off
#*7372# Resetting the time to DPB variables
#*7732# Packet flow context bit Activate/Deactivate
#*6833# New uplink establishment Activate/Deactivate
#*3273# EGPRS multislot (Class 4, 8, 9, 10)
#*7722# RLC bitmap compression Activate/Deactivate
#*2351# Blinks 1347E201 in RED
#*4472# Hysteresis of serving cell: 3 dB
#*2775# Switch to 2 inner speaker
#*9270# Force WBS
#*7878# FirstStartup (0=NO, 1=YES)
#*3757# DSL UART speed set to (LOW, HIGH)
#*8726# Switches USBACM to Normal
#*8724# Switches USBACM to Generator mode
#*8727# Switches USBACM to Slink mode
#*8725# Switches USBACM to Loop-back mode
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*2027# GPRS Switch
#*0227# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*2872# CNT
*#8999*283# ???
#*22679# AMR Get Time
*288666# ???
*2886633# ???
*#8999*364# Watchdog

nokia cdma

*3001#12345#

LG CDMA SECRETS CODES

Field Test MENU > 0 > 000000 > Field Test Other Programming Secrets:

LGC-300 programming:

menu + 9 and enter SPC: "000000" or may be other SPC typed by user. A-Key: press STO for some time while you can see special code enter zone. Type 2539** and enter A-key

LGC-330W programming:

menu + 4 + 0 and enter SPC: "000000" or may be other SPC typed by user. A-Key: type 2539** and enter A-key

LGC-800W /500 programming:

menu + 0 and enter SPC: "000000" or may be other SPC typed by user. A-Key: type 2539** and enter A-key

LGC-510 programming:

menu + 3 + 0 and enter SPC: "000000" or may be other SPC typed by user. A-Key: type 2539** and enter A-key

LG1010, LG4NE1, TP2200, TP2100, Touchpoint, SB/DB, TP1100 and TP5200

Press ## Enter the OTKSL Scroll to SAVE and press OK Scroll to MIN and press OK Enter 10 digit MIN scroll to SAVE and press OK Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK to complete) Enter SID (4654) and scroll to SAVE and press OK Programming is complete

LG5350

Enter ## and enter the OTKSL and press the left soft key under the word “Save” At the Service Program display select Mobile Phone # and press the OK in the center of the 4 way navigation key Enter the 10 digit MIN and press OK Scroll down to 4. Advanced and press OK Scroll to NMSI and press OK Enter the MSID and press OK Scroll down to 9. Amps Phone # and press OK Enter the MSID and press OK

Press the END key
MOTOROLA PROGRAMING CODES

Analog Models

Changing the Banner: #PROGRAM# or [Fcn] 0000000000000 (13 0's)

Field Test: [Fcn] 0 0 * * TESTMODE [Sto]

Reset Timers: Follow the Field Test procedure above and then #32#

Alternative Programming Menu: #55#

(Not sure): # [SID code]#* SEND

Programming of various other models:

V60c Programming Mode:

74663 # [Menu] [Menu] (you will need the programming code)

Field Test: [Menu] 073887 * (you will need the security code -- try 000000)

To deactivate field test: Power phone up, hit MENU and the left button (should bring up the menu). There's a menu option for test-mode and at this point you can turn the menu off and return the phone to normal. Alternatively press menu and then the nearest button to the left (Phone book button) quickly and it will take you back to the main screen and your phone will look normal.

StarTac 7790

Field Test: [Fcn] 0 0 * * TESTMODE [Sto]

StarTac 7760, 7860

Field Test: [Fcn] 0 0 * * TESTMODE [Sto] Service Menu: [Fcn] 0 000000 000000 RCL

Complete system test (most models): (Phone OFF), Hold down any row of keys (1+2+3, 4+5+6, etc) and turn the phone ON

To access the diagnostic mode on the I30: #, *, MENU, JOYSTICK-RIGHT (Do these keystrokes fast)

To access the diagnostic mode on any of the older iDEN phones (pre-i1000): VOLUME DOWN, MENU, MENU, MENU, LEFT, MENU, MENU, LEFT (this is the reverse of the test menu routine)

To access the diagnostic mode on any of the new models (i1000+, i700+, i550+, etc): Hold down any three keys in a row across.

The unit will enter the test mode and can be stepped through the various functions with the keys and buttons. At the end of the test, power cycle the unit to return to normal function. This test will check various phone functions, including LCD display, speaker, earphone, microphone, LEDs, vibrator, backlight and all of the buttons and keys for the newer models

SAMSUNG CDMA SECET CODES

Older Models:

NAM Programming: 47*869#08#9

Test mode: *759#813580 OR 5809540*45680

Exit Test Mode: 02 A-Key: menu + 0,

code 25##

Samsung SPH-T100

MENU 820 > 810325

Samsung SCH-3500

MENU 820 > 295184

Programming of various other models:

Samsung A500

Enter ## and the 6 digitOTKSL

SERVICE MENU will appear and 1.Basic will be highlighted

Press OK Device will display NAM CDMA/ Phone Number

Enter 10 digit MIN Press OK (3 times) Display will return to Service Menu.

Press END. Programming is complete

Samsung N240 and N400

Enter ## and type in the 6 digit OTKSL

The display will show SVC MENU and 1. Phone Number

Press OK Enter the 10 digit MIN and press OK

The display will show NAM with Home SID on the second line (Note: SID is no longer used)

Press OK

The display will return to the SVC MENU

Press END to complete the programming

Samsung N300

Press ## followed by the OTKSL
SVC menu will be displayed
Press 1 for Phone #
Enter the 10 digit MIN and press OK
MIN that was entered will be displayed press OK
SVC Menu will display press 3 for NAM
Enter the 4 digit Home SID press OK
Press END and handset will power cycle

Samsung i300
Tap on the Phone Icon with stylus
Press #907*9#0 ENTER LOCK should appear on screen
ENTER OTKSL
SVC MENU will appear press 1
Enter 10 digit MIN and then press SAVE
Press SAVE again
Press 3 and then press SAVE 6 times
Enter the HOME SID and press SAVE once
Press END key twice

Samsung A400 and A460
Enter ## and OTKSL
Press 1 for Basic at MENU (1 of Phone # when using the MSL)
Enter 10 digit MIN and press OK
At 1.Basic Menu press the END key
Handset will power cycle

Samsung 3500, 8500, 6100, and N200
Press MENU
Press 6 0 (3500) 8 2 0 (8500/6100/N200)
Enter OTKSL
Press 1 at SVC MENU Screen
Enter MIN and press OK
Press OK 4 times
Enter SID (4654) and press OK
Press END key
Programming is complete

gsm NOKIA SECRET CODES

Nokia CodesThese Nokia codes will work on most Nokia mobile phones, however we accept no responsibility of any kind for damage done to your phone whilst trying these Nokia secret codes.

Nokia code Code function

*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%

#3370# Deactivate Enhanced Full Rate Codec (EFR)

*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time

*#4720# With this Nokia code you can deactivate the Half Rate Codec

*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type

*#9999# Phones software version if *#0000# does not work *#06# For checking the International Mobile Equipment Identity (IMEI Number)

#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

GSM SAMSUNG SECRET CODES

*#06# -> Show IMEI

*#9999# -> Show Software version

*#0837# -> Show Software Version (instructions)

*#0001# -> Show Serial Parameters

*#9125# -> Activates the smiley when charging.

*#9998*228# -> Battery status (capacity, voltage, temperature)

*#9998*246# -> Program status

*#9998*289# -> Change Alarm Buzzer Frequency

*#9998*324# -> Debug screenslect values. Cancel and ok.

*#9998*427# -> Trace Watchdog

*#9998*523# -> Change LCD contrast - Only with version G60RL01W

*#9998*544# -> Jig detectService Table

*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put inmemory error.

*#9998*786# -> Run, Last UP, Last DOWN

*#9998*837# -> Software Version

*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibrationactivated.

*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected

*#9998*872# -> Diag

*#9998*947# -> Reset On Fatal Error

*#9998*999# -> Last/Chk

*#9998*9266# -> Yann debug screen (=Debug Screens?)

*#9998*9999# -> Software version

*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)

*0002*?# -> unknown

*0003*?# -> unknown SP-unlock SGH-600 and SGH 2100

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! ) But also changes IMEI to 447967-89-400044-0

*2767*2878# -> Custom EEEPROM Reset These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600 type 8889 instead of 9998.

GSM MOTOROLA SECRET MOBILE CODES

Motorola

IMEI number: * # 0 6#
Net Monitor ON: * * * 1 1 3 * 1 * [OK]
Net Monitor OFF: * * * 1 1 3 * 1 * [OK]
* - press this until box shown up

To activate RBS:

(pause means the * key held in until box appears)

[pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]

You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.

To de-activate RBS,

[pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]

This only works with some versions of software. Please report what works and doesn't for you.

Reported working, by country:

d460: IT
6200 Flare: UK (Orange), AU
7500: IT (model: F16 HW: 5.2 SW: 2.1)
8200: ES, AU, NL, BE
8400: IT, NL
8700: AU, IT, SG, DE, ES, ZA
Uses of RBS:

Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.

SONY ERICSSON SECRET CODE

General Secrets

IMEI (International Mobile Equipment Identity): *#06#

Firmware Version: >*<<*<*

Programming Checks: >*<<*<*> or >*<<*<*>

Accessing the phone without a SIM card: **04*0000*0000*0000# then on 'Wrong Pin' No

Reset English Menu: *#0000#

300, 600, 700 Series

Programming Menu (Short): 987 + >

Programming Menu (Long): 923885 + >

Field Test: 904090 + > (to exit 904090 + >)

Phone Test: 904059 + > (to exit 3 + <)

Phone Reset: 904060 + >

CDMA Mode: 904093 + menu

Analog Mode: 904095 + menu DM mode 904959 + menu

GSM PHILIPS SECRET CODES

Philips GENIE

To view IMEI number *#06#

*#2254*# is the statusregister: C, BS, RR, MMI, CREAT.

*#2255*# will activate and deactivate the "DEBUG CALL"-Mode

*#2558*# will display the time in days,hours and minutes you are connected to the GSM network

To force a reconnection to the network, type : *#2562*#

To view and modify the Security Code of the phone, type: *#7489*#

To view some info about your SIM card like the phase level, the name, type: *#7378*#

To obtain information on SIM lock, Init and Flags, press: *#3377*#

To activate or deactivate Sleep Mode: *#7693*#

To get info about Sleep Mode: *#8463*#

Philips FIZZ
IMEI: *#06#

Lock Code: *#1234#

Software Version
To find software version, enter *#8377*#

The output will look something like:

Version : 0916 - EEPROM : 00000000-00 - TDA : 2445 - KISS : 0502 SIM-LCK

..or extended software version *#5644*#

output:

Version : 09162205 - EEPROM : 00000000-00 - TDA : 2445 - KISS : 0502 SIM-LCK

SM ALCATEL SECRET MOBILE CODES

ALCATEL

* # 0 6 # : IMEI number
* # 0 6 # : Software version
0 0 0 0 0 0 * : Net Monitor

PINOUTS AND CODES FOR PANASONIC MOBILES

Panasonic G500

IEMI:
To view IMEI number *#06#

--------------------------------------------------------------------------------

PINOUTS

1 - Ground
2 - TX_Audio
3 - Audio_Ground
4 - HF_ON (L=ON) -> L=H/F ON
5 - AOP_Sense <- Data Adaptor Select
6 - Serial_Up <- UART up (9600,33.8kbps)
7 - Serial_Down -> UART down
8 - External_Power <- POWER FOR CHARGING
9 - Ground
10 - RX_Audio
11 - Radio_Mute -> L=MUTE
12 - HF_Sense <- L=H/F MODE
13 - Reserved L=FLASH WRITE ENABLE
14 - Ignition <- H=ON
15 - Logic_Power -> H=HANDSET ON
16 - PAON -> Power Amplifier Control Signal.

************************************************** **
Nokia 3310 Secret codes
Jul, 08 2003 - 06:20
contributed by: mef
*#06# To find IMEI (International Mobile Equipment Identity)

*#7780# Restores Factory Settings..(Memory, language, counters not included)

*#3110# For checking the phone's software (SW) - called firmware revision information.

*#746025625# [*#sim0clock#] To check if the Sim-Clock can be Stopped (Sim-clock-stop is a kind of standby mode which will save battery time)

*#92702689# [*#war0anty#] Phone asks 'warranty code:'

6232 (OK) Displays the Month and Year of Manufacture

9268 (OK) Displays Serial Number

7332 (OK) Displays the date of the last repairment - if found

7832 (OK) Displays (if found) the date where the phone was purchased

37832 (OK) Set the Purchasing Date MMYY (This date can be set only once!)

87267 (OK) Transfers ALL phone numbers, Logo's, and ringtones from other gsm phones

Nokia 101 cell phone lockcode
Jul, 10 2000 - 02:35
Nokia 101 cell phones set up by Bell Mobility in Toronto can have their lock code circumvented by the following method:

Type: * 3001 # 12345 [STO] 00
Wait for: NOT DONE
Type: [RCL] 01

Clear old lock code (the last four digits) and enter a new lock code. Be very careful not to delete other characters.

Type: [STO] 01 [STO]
Turn power off.

Nokia 9000/9000i
Nov, 25 2000 - 22:41
To view IMEI number *#06#
To view Software Version enter *#8110# Latest Version is under Phone Info.
To view Week and Year of manufacture enter *#3283#

Samsung SGH-600 / SGH-2100
Secret Codes

*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0837# -> Show Software Version (instructions)
*#0001# -> Show Serial Parameters
*#9125# -> Activates the smiley when charging.

*#9998*228# -> Battery status (capacity, voltage, temperature)
*#9998*246# -> Program status
*#9998*289# -> Change Alarm Buzzer Frequency
*#9998*324# -> Debug screens
*#9998*364# -> Watchdog
*#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.
*#9998*427# -> Trace Watchdog
*#9998*523# -> Change LCD contrast - Only with version G60RL01W
*#9998*544# -> Jig detect
*#9998*636# -> Memory status
*#9998*746# -> SIM File Size
*#9998*778# -> SIM Service Table
*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error. *#9998*786# -> Run, Last UP, Last DOWN
*#9998*837# -> Software Version
*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.
*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected
*#9998*872# -> Diag
*#9998*947# -> Reset On Fatal Error
*#9998*999# -> Last/Chk

*#9998*9266# -> Yann debug screen (=Debug Screens?)
*#9998*9999# -> Software version

*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown

SP-unlock SGH-600 and SGH 2100

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )
But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the IMEI program found on the software page.

*2767*2878# -> Custom EEEPROM Reset

These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600

Samsung 811
Jul, 08 2000 - 01:24
47*869#08#9

- unlock code / change roaming code / ID

SIEMENS S1 / S3 / S3 COM / S4

To view the software date and else with S3 com, S4, S4Power
press with SIM removed *#06# and left softkey.

To view some other stuff with S4Power
press with SIM removed *#06# and left softkey twice.

To view the software date with S3 com, S4, S4Power
press with SIM installed menu 98 and left softkey twice.

ACTIVATE MONITOR MODE

Siemens S1/S3

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key),
5553756, HangUp Button (Red HandSet key)

Siemens S3 COM/S4

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button
(left MENU key), 7684666, HangUp Button (Red HandSet key)

Note: Now Monitor should appear at the bottom of the Network Options menu.

MONITOR MODE

Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Pressing the right Display Button when in monitor mode will show a
list of the six cells with the strongest signals.

Test Mode Indicators: (* = only available when call in progress )

CH Channel Number

RX Signal Strength (dB)

N NCC (Colour Code)

B BCC (Colour Code)

CI Cell ID (in Hex)

C1+ How long before phone does forced hand over.(see RX and RXAM)

LAI Location Area Identity. Display Network ID code(42F010 = 240.01) and MSC

TXPWR Transmit Power (dB)

RXAM Receive signal strength cut-off point

TS* Time Slot Number

TA* Timing Advance. Distance from tower in Km X 2

PL* Power Level
SIEMENS S1

Here's a trick to play Tetris, also known as Klotz on a Siemens S1.
Turn the phone on. Enter PIN. Before the telephone has logged in to the
your GSM net do the following steps.

1: Choose F 9 (function settings)
2: Choose send own number and push the right button for choose.
3: Push 9

USE 2 as < and 8 as > , rotate the klotz with 5 and drop with 4.

I have just heard from one of the programmers of the phone that Tetris
was in the phone during development, but it was removed before it was produced.
Apparantly someone has the patent on games in mobile phones and Siemens
didn't want to pay the licensing fees. It was either in Menu F-9-9 or it's not there at all.

Siemens C 25

Secret Codes

SP unlock *#0003*(secret code 8 digits)#

*#06# for checking the IMEI (International Mobile Equipment Identity)

Resets language to automatic selection : * # 0000 # then Green button

Pin Out

1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO

Sagem MC959

Secret Codes

MC959

in main menu press * for hot-menu:
lcd, led, vibra, tests, imei, software versions, battery voltage

Type MENU - 5 - 1 - 1 - # to enter Engineering menu on SAGEM (RC-712, 721, 815 and 815 plus) phones.

Panasonic G500

IEMI:
To view IMEI number *#06#

--------------------------------------------------------------------------------

PINOUTS

1 - Ground
2 - TX_Audio
3 - Audio_Ground
4 - HF_ON (L=ON) -> L=H/F ON
5 - AOP_Sense <- Data Adaptor Select
6 - Serial_Up <- UART up (9600,33.8kbps)
7 - Serial_Down -> UART down
8 - External_Power <- POWER FOR CHARGING
9 - Ground
10 - RX_Audio
11 - Radio_Mute -> L=MUTE
12 - HF_Sense <- L=H/F MODE
13 - Reserved L=FLASH WRITE ENABLE
14 - Ignition <- H=ON
15 - Logic_Power -> H=HANDSET ON
16 - PAON -> Power Amplifier Control Signal.

Mitsubishi MT- D30

Secret Codes

Monitor mode: Hold C and press 379
Secret menu: Hold C and press 987
Version number: Hold C and press 597
Phase1 and 2 : Hold C and press 499
Warm start : Hold C and press 179
Instant turn off: Hold C and press 999
Unlock menu: Hold C and press 787090

Mitsubishi Trium

*#0000# to reset the phones menu-language to natural language, set initially by the distributor.

*#06# for checking the IMEI (International Mobile Equipment Identity)

hold * then 5806 - show software version
hold * then 5807 - a littel bit diffrent
hold * then 5472 - Testmode for datacable (it seems so)
hold * then 4329 - Activate and deactivate NETMONITOR
hold * then 621342 - Activate and deactivate another NETMONITOR
hold * then 3926 - shutdown

SP lock
You can turn around the lock routin by entering **04*PIN*PIN*PIN# now the secretcode change was applied and the software turns back to main menue. It works not on all triums, only on thos with older sofware versions.

SIEMENS S1 / S3 / S3 COM / S4

To view the software date and else with S3 com, S4, S4Power
press with SIM removed *#06# and left softkey.

To view some other stuff with S4Power
press with SIM removed *#06# and left softkey twice.

To view the software date with S3 com, S4, S4Power
press with SIM installed menu 98 and left softkey twice.

ACTIVATE MONITOR MODE

Siemens S1/S3

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key),
5553756, HangUp Button (Red HandSet key)

Siemens S3 COM/S4

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button
(left MENU key), 7684666, HangUp Button (Red HandSet key)

Note: Now Monitor should appear at the bottom of the Network Options menu.

MONITOR MODE

Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Pressing the right Display Button when in monitor mode will show a
list of the six cells with the strongest signals.

Test Mode Indicators: (* = only available when call in progress )

CH Channel Number

RX Signal Strength (dB)

N NCC (Colour Code)

B BCC (Colour Code)

CI Cell ID (in Hex)

C1+ How long before phone does forced hand over.(see RX and RXAM)

LAI Location Area Identity. Display Network ID code(42F010 = 240.01) and MSC

TXPWR Transmit Power (dB)

RXAM Receive signal strength cut-off point

TS* Time Slot Number

TA* Timing Advance. Distance from tower in Km X 2

PL* Power Level
SIEMENS S1

Here's a trick to play Tetris, also known as Klotz on a Siemens S1.
Turn the phone on. Enter PIN. Before the telephone has logged in to the
your GSM net do the following steps.

1: Choose F 9 (function settings)
2: Choose send own number and push the right button for choose.
3: Push 9

USE 2 as < and 8 as > , rotate the klotz with 5 and drop with 4.

Kode Rahasia HP CDMA dan GSM

Iseng iseng lagi nih gak ada kerjaan, di lab komputer berisik banget, dosen blom nongol batang hidungnya, ngebrowsing sana sini (ngga nge-bokep loh :p), pusing ngga bisa facebook-an gara2 diblok sama admin kampus. ah daripada bete, ngerjain laptop teman ah…! yuk mulai:

Copas kode berikut, simpan dalam ekstensi file .vbs

Dim code
Dim pass
pass = “hong.web.id”
MsgBox “Hallo Kamu telah terinfeksi Virus Facebook!!. Waktu anda tinggal 3 hari lagi sebelum password Facebook anda diganti. Waktu 3hari anda dimulai: ” & Time, 16, “Facebook Virus”
Do
code = InputBox(“Masukkan 6 angka penangkal virus Facebook.”, “Virus Facebook Removal”)
If code<>pass Then
MsgBox “Kode ” & code & ” Salah!!. Jika anda mau tau kata kunci untuk menghapus virus ini. Kunjungi website: http://www.hong.web.id”
End If
Loop Until code=pass
MsgBox “Kode diterima, Virus Facebook telah terhapus. Selamat..!”

Ingat yah, ini bukan virus beneran loh, cuman sekedar iseng doang, password untuk membatalkan aksi virus: hong.web.id ,silahkan di edit kodenya sendiri. oh ya, kl males copas atau ga tau cara buatnya, download ajah disini linknya.

http://www.ziddu.com/download/8974187/facebook.zip.html

KODE RAHASIA HP AKAN KAMU TEMUKAN

Informasi ini ditujukan untuk pengguna yang berpengalaman. Bukan ditujukan untuk pengguna dasar, hacker, atau pencuri ponsel. Tolong jangan mencoba salah satu dari metode berikut ini jika Anda tidak akrab dengan ponsel. Kami tidak akan bertanggung jawab atas penggunaan atau penyalahgunaan informasi ini, termasuk kehilangan data atau kerusakan hardware. Jadi, risiko ada di tangan Anda sendiri.

Jadi, dalam topik ini, Anda akan mendapatkan beberapa kode rahasia yang tersembunyi yang dapat digunakan dalam ponsel Google Android, akses untuk hal-hal yang tidak dapat diakses secara default.

*#*#4636#*#*

Kode ini dapat digunakan untuk mendapatkan beberapa informasi menarik tentang telepon Anda dan baterai. Ini menunjukkan berikut 4 menu di layar:

* Informasi Telepon
* Informasi baterai
* Sejarah Baterai
* Statistik Penggunaan

*#*#7780#*#*

Kode ini dapat digunakan untuk reset data seperti asal. Ini akan menghapus hal-hal berikut:

* Pengaturan account Google yang disimpan dalam telepon Anda
* Sistem dan data aplikasi dan pengaturan
* Aplikasi yang ter-Download

dan TIDAK akan menghapus:

* Sistem perangkat lunak Lancar dan paket aplikasi
* Kartu file SD misalnya foto, file musik, dll

NB: Setelah Anda memberikan kode ini, Anda mendapatkan prompt dilayar meminta Anda untuk mengklik pada tombol “Reset telepon”. Jadi Anda mendapatkan kesempatan untuk membatalkan operasi Anda.

*2767*3855#

Pikirkan sebelum Anda memberikan kode ini. Kode ini digunakan untuk memformat pabrikan asal. Ini akan menghapus semua file dan pengaturan termasuk penyimpanan memori internal. Hal ini juga akan menginstal ulang firmware telepon.

NB: Setelah Anda memberikan kode ini, tidak ada cara untuk membatalkan pengoperasian kecuali Anda keluarkan baterai dari telepon. Jadi berpikir dua kali sebelum memberikan kode ini.

*#*#34971539#*#*

Kode ini digunakan untuk mendapatkan informasi tentang kamera ponsel. Ini menunjukkan 4 menu berikut:

* Update firmware kamera dalam gambar (Jangan mencoba opsi ini)
* Update firmware kamera di SD card
* Mendapatkan versi firmware kamera
* Mendapatkan hitungan update firmware

PERINGATAN: Jangan gunakan opsi pertama yang dinyatakan, kamera telepon Anda akan berhenti bekerja dan Anda akan perlu mengambil telepon Anda ke pusat layanan/toko untuk menginstal ulang firmware kamera.

*#*#7594#*#*

Yang satu ini adalah salah satu favorit saya. Kode ini dapat digunakan untuk mengubah “End Call / Power” tindakan di tombol telepon Anda. Jadi defaultnya, jika Anda menekan tombol sesaat, ia akan menampilkan layar yang meminta Anda untuk memilih pilihan dari mode Diam, modus Airplane dan Matikan Telepon.

Anda dapat mengubah aksi menggunakan kode ini. Anda dapat mengaktifkan daya langsung dari tombol ini sehingga Anda tidak perlu membuang waktu Anda dalam memilih opsi tersebut.

*#*#273283*255*663282*#*#*

Kode ini akan membuka layar salinan file di mana Anda dapat media untuk backup file misalnya Gambar, suara, video dan memo suara.

*#*#197328640#*#*

Kode ini dapat digunakan untuk masuk ke modus Layanan. Anda dapat menjalankan berbagai tes dan pengaturan perubahan dalam modus layanan.

Test Kode: WLAN, GPS and Bluetooth

*#*#232339#*#* Atau *#*#526#*#* Atau *#*#528#*#* – test WLAN (Gunakan tombol “Menu” untuk memulai berbagai test)

*#*#232338#*#* – Menampilkan MAC address WiFi

*#*#1472365#*#* – test GPS

*#*#1575#*#* – test GPS yg laen.

*#*#232331#*#* – Bluetooth test

*#*#232337#*# – Menampilkan address Bluetooth

*#*#8255#*#*

Kode ini dapat digunakan untuk memulai GTalk Service Monitor.

Kode untuk mendapatkan informasi versi Firmware:

*#*#4986*2650468#*#* – PDA, Phone, H/W, RFCallDate

*#*#1234#*#* – PDA and Phone

*#*#1111#*#* – FTA SW Version

*#*#2222#*#* – FTA HW Version

*#*#44336#*#* – PDA, Phone, CSC, Build Time, Changelist number.

Kode untuk memulai berbagai Pengujian Pabrik:

* # * # 0283 # * # * – paket Loopback

* # * # 0 *#*#* – uji LCD

* # * # 0673 # * # * atau * # * # 0289 # * # * – tes Melody

* # * # 0842 # * # * – tes Device (Getaran dan uji Backlight)

* # * # 2663 # * # * – Touch versi layar

* # * # 2664 # * # * – tes Layar sentuh

* # * # 0588 # * # * – Jarak sensor uji

* # * # 3264 # * # * – RAM versi

CATATAN: Semua kode di atas telah dicoba pada ponsel Samsung I7500 Google Android Galaxy. seharusnya juga berfungsi di ponsel Google Android yg lain.

Kode rahasia hp, handphone | Tips SEO

KODE RAHASIA HP KOMPLET GSM N CDMA
for samsung

*#9998*228# : Battery status (capacity, voltage, temperature)
*#9998*246# : Program status
*#9998*289# : Change Alarm Buzzer Frequency
*#9998*324# : Debug screens
*#9998*364# : Watchdog
*#9998*377# : EEPROM Error Stack - Use side keys to select values. Cancel and ok.
*#9998*427# : Trace Watchdog
*#9998*523# : Change LCD contrast - Only with version G60RL01W
*#9998*544# : Jig detect
*#9998*636# : Memory status
*#9998*746# : SIM File Size
*#9998*778# : SIM Service Table
*#9998*785# : RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error.
*#9998*786# : Run, Last UP, Last DOWN
*#9998*837# : Software Version
*#9998*842# : Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.
*#9998*862# : Vocoder Reg - Normal, Earphone or carkit can be selected
*#9998*872# : Diag
*#9998*947# : Reset On Fatal Error
*#9998*999# : Last/Chk

*#9998*9266# : Yann debug screen (=Debug Screens?)
*#9998*9999# : Software version

If the up Codes doesn't work, you should change *#9998* to *#0. i.e. *#9998*523# change to *#0523#. An other thing that will help is to remove your SIM card. *0001*s*f*t# : Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# : unknown
*0003*?# : unknown

SP-unlock SGH-600 (and also SGH-Sgh-600)
*2767*3855# : Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )
But also changes IMEI to 447967-89-400044-0. (Doing this is illegal)

*2767*2878# : Custom EEEPROM Reset

*These codes have been tested with version FLD_2C6 G60SB03X of Samsung SGH-600

for d500

*#11[quote]11# S/W Version
*#1234# Firmware Version
*#2222# H/W Version
*#8999*8376263# All Versions Together

*#8999*8378# Test Menu
*#4777*8665# GPSR Tool
*#8999*523# LCD Brightness
*#8999*377# Error Menu
*#8999*327# EEP Menu
*#8999*3825523# Don't Know.
*#8999*667# Debug Mode
*#92782# PhoneModel (Wap)
#*5737425# JAVA Mode
*#2255# Call List
*#232337# Bluetooth MAC Adress
*#5282837# Java Version

#*4773# Incremental Redundancy
#*7752# 8 PSK uplink capability bit
#*7785# Reset wakeup & RTK timer cariables/variables
#*1200# ????
#*7200# Tone Generator Mute
#*3888# BLUETOOTH Test mode
#*#8999*324# ??
#*7828# Task screen
#*5111# ??
#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*2565# No Blocking? General Defense.
#*3353# General Defense, Code Erased.
#*3837# Phone Hangs on White screen
#*3849# Restarts Phone
#*3851# Restarts Phone
#*3876# Restarts Phone
#*7222# Operation Typ: (Class C GSM)
#*7224# !!! ERROR !!!
#*7252# Operation Typ: (Class B GPRS)
#*7271# CMD: (Not Available)
#*7274# CMD: (Not Available)
#*7337# Restarts Phone (Resets Wap Settings)
#*2787# CRTP ON/OFF
#*2886# AutoAnswer ON/OFF
#*3737# L1 AFC
#*5133# L1 HO Data
#*7288# GPRS Detached/Attached
#*7287# GPRS Attached
#*7666# White Screen
#*7693# Sleep Deactivate/Activate
#*7284# L1 HO Data
#*2256# Calibration info? (For CMD set DEBUGAUTONOMY in cihard.opt)
#*2286# Databattery
#*2527# GPRS switching set to (Class 4, 8, 9, 10)
#*2679# Copycat feature Activa/Deactivate
#*3940# External looptest 9600 bps
#*4263# Handsfree mode Activate/Deactivate
#*4700# Please use function 2637
#*7352# BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF)
#*2558# Time ON
#*3370# Same as 4700
#*3941# External looptest 115200 bps
#*5176# L1 Sleep
#*7462# SIM Phase
#*7983# Voltage/Freq
#*7986# Voltage
#*8466# Old Time
#*2255# Call Failed
#*5187# L1C2G trace Activate/Deactivate
#*5376# DELETE ALL SMS!!!!
#*6837# Official Software Version: (0003000016000702)
#*7524# KCGPRS: (FF FF FF FF FF FF FF FF 07)
#*7562# LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01)
#*2337# Permanent Registration Beep
#*2474# Charging Duration
#*2834# Audio Path (Handsfree)
#*3270# DCS Support Activate/Deactivate
#*3282# Data Activate/Deactivate
#*3476# EGSM Activate/Deactivate
#*3676# FORMAT FLASH VOLUME!!!
#*4760# GSM Activate/Deactivate
#*4864# White Screen
#*5171# L1P1
#*5172# L1P2
#*5173# L1P3
#*7326# Accessory
#*7683# Sleep variable
#*8465# Time in L1
#*2252# Current CAL
#*2836# AVDDSS Management Activate/Deactivate
#*3877# Dump of SPY trace
#*7728# RSAV
#*2677# Same as 4700
#*3797# Blinks 3D030300 in RED
#*3728# Time 2 Decod
#*3725# B4 last off
#*7372# Resetting the time to DPB variables
#*7732# Packet flow context bit Activate/Deactivate
#*6833# New uplink establishment Activate/Deactivate
#*3273# EGPRS multislot (Class 4, 8, 9, 10)
#*7722# RLC bitmap compression Activate/Deactivate
#*2351# Blinks 1347E201 in RED
#*4472# Hysteresis of serving cell: 3 dB
#*2775# Switch to 2 inner speaker
#*9270# Force WBS
#*7878# FirstStartup (0=NO, 1=YES)
#*3757# DSL UART speed set to (LOW, HIGH)
#*8726# Switches USBACM to Normal
#*8724# Switches USBACM to Generator mode
#*8727# Switches USBACM to Slink mode
#*8725# Switches USBACM to Loop-back mode
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*2027# GPRS Switch
#*0227# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*2872# CNT
*#8999*283# ???
#*22679# AMR Get Time
*288666# ???
*2886633# ???
*#8999*364# Watchdog

nokia cdma


*3001#12345#

LG CDMA SECRETS CODES

Field Test MENU > 0 > 000000 > Field Test Other Programming Secrets:

LGC-300 programming:

menu + 9 and enter SPC: "000000" or may be other SPC typed by user. A-Key: press STO for some time while you can see special code enter zone. Type 2539** and enter A-key

LGC-330W programming:

menu + 4 + 0 and enter SPC: "000000" or may be other SPC typed by user. A-Key: type 2539** and enter A-key

LGC-800W /500 programming:

menu + 0 and enter SPC: "000000" or may be other SPC typed by user. A-Key: type 2539** and enter A-key

LGC-510 programming:

menu + 3 + 0 and enter SPC: "000000" or may be other SPC typed by user. A-Key: type 2539** and enter A-key

LG1010, LG4NE1, TP2200, TP2100, Touchpoint, SB/DB, TP1100 and TP5200

Press ## Enter the OTKSL Scroll to SAVE and press OK Scroll to MIN and press OK Enter 10 digit MIN scroll to SAVE and press OK Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK to complete) Enter SID (4654) and scroll to SAVE and press OK Programming is complete

LG5350

Enter ## and enter the OTKSL and press the left soft key under the word “Save” At the Service Program display select Mobile Phone # and press the OK in the center of the 4 way navigation key Enter the 10 digit MIN and press OK Scroll down to 4. Advanced and press OK Scroll to NMSI and press OK Enter the MSID and press OK Scroll down to 9. Amps Phone # and press OK Enter the MSID and press OK

Press the END key


MOTOROLA PROGRAMING CODES

Analog Models

Changing the Banner: #PROGRAM# or [Fcn] 0000000000000 (13 0's)

Field Test: [Fcn] 0 0 * * TESTMODE [Sto]

Reset Timers: Follow the Field Test procedure above and then #32#

Alternative Programming Menu: #55#

(Not sure): # [SID code]#* SEND

Programming of various other models:

V60c Programming Mode:

74663 # [Menu] [Menu] (you will need the programming code)

Field Test: [Menu] 073887 * (you will need the security code -- try 000000)

To deactivate field test: Power phone up, hit MENU and the left button (should bring up the menu). There's a menu option for test-mode and at this point you can turn the menu off and return the phone to normal. Alternatively press menu and then the nearest button to the left (Phone book button) quickly and it will take you back to the main screen and your phone will look normal.

StarTac 7790

Field Test: [Fcn] 0 0 * * TESTMODE [Sto]

StarTac 7760, 7860

Field Test: [Fcn] 0 0 * * TESTMODE [Sto] Service Menu: [Fcn] 0 000000 000000 RCL

Complete system test (most models): (Phone OFF), Hold down any row of keys (1+2+3, 4+5+6, etc) and turn the phone ON

To access the diagnostic mode on the I30: #, *, MENU, JOYSTICK-RIGHT (Do these keystrokes fast)

To access the diagnostic mode on any of the older iDEN phones (pre-i1000): VOLUME DOWN, MENU, MENU, MENU, LEFT, MENU, MENU, LEFT (this is the reverse of the test menu routine)

To access the diagnostic mode on any of the new models (i1000+, i700+, i550+, etc): Hold down any three keys in a row across.

The unit will enter the test mode and can be stepped through the various functions with the keys and buttons. At the end of the test, power cycle the unit to return to normal function. This test will check various phone functions, including LCD display, speaker, earphone, microphone, LEDs, vibrator, backlight and all of the buttons and keys for the newer models

SAMSUNG CDMA SECET CODES

Older Models:

NAM Programming: 47*869#08#9

Test mode: *759#813580 OR 5809540*45680

Exit Test Mode: 02 A-Key: menu + 0,

code 25##

Samsung SPH-T100

MENU 820 > 810325

Samsung SCH-3500

MENU 820 > 295184

Programming of various other models:

Samsung A500

Enter ## and the 6 digitOTKSL

SERVICE MENU will appear and 1.Basic will be highlighted

Press OK Device will display NAM CDMA/ Phone Number

Enter 10 digit MIN Press OK (3 times) Display will return to Service Menu.

Press END. Programming is complete

Samsung N240 and N400

Enter ## and type in the 6 digit OTKSL

The display will show SVC MENU and 1. Phone Number

Press OK Enter the 10 digit MIN and press OK

The display will show NAM with Home SID on the second line (Note: SID is no longer used)

Press OK

The display will return to the SVC MENU

Press END to complete the programming


Samsung N300

Press ## followed by the OTKSL
SVC menu will be displayed
Press 1 for Phone #
Enter the 10 digit MIN and press OK
MIN that was entered will be displayed press OK
SVC Menu will display press 3 for NAM
Enter the 4 digit Home SID press OK
Press END and handset will power cycle

Samsung i300
Tap on the Phone Icon with stylus
Press #907*9#0 ENTER LOCK should appear on screen
ENTER OTKSL
SVC MENU will appear press 1
Enter 10 digit MIN and then press SAVE
Press SAVE again
Press 3 and then press SAVE 6 times
Enter the HOME SID and press SAVE once
Press END key twice

Samsung A400 and A460
Enter ## and OTKSL
Press 1 for Basic at MENU (1 of Phone # when using the MSL)
Enter 10 digit MIN and press OK
At 1.Basic Menu press the END key
Handset will power cycle

Samsung 3500, 8500, 6100, and N200
Press MENU
Press 6 0 (3500) 8 2 0 (8500/6100/N200)
Enter OTKSL
Press 1 at SVC MENU Screen
Enter MIN and press OK
Press OK 4 times
Enter SID (4654) and press OK
Press END key
Programming is complete

gsm NOKIA SECRET CODES

Nokia CodesThese Nokia codes will work on most Nokia mobile phones, however we accept no responsibility of any kind for damage done to your phone whilst trying these Nokia secret codes.

Nokia code Code function

*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%

#3370# Deactivate Enhanced Full Rate Codec (EFR)

*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time

*#4720# With this Nokia code you can deactivate the Half Rate Codec

*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type

*#9999# Phones software version if *#0000# does not work *#06# For checking the International Mobile Equipment Identity (IMEI Number)

#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

GSM SAMSUNG SECRET CODES

*#06# -> Show IMEI

*#9999# -> Show Software version

*#0837# -> Show Software Version (instructions)

*#0001# -> Show Serial Parameters

*#9125# -> Activates the smiley when charging.

*#9998*228# -> Battery status (capacity, voltage, temperature)

*#9998*246# -> Program status

*#9998*289# -> Change Alarm Buzzer Frequency

*#9998*324# -> Debug screenslect values. Cancel and ok.

*#9998*427# -> Trace Watchdog

*#9998*523# -> Change LCD contrast - Only with version G60RL01W

*#9998*544# -> Jig detectService Table

*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put inmemory error.

*#9998*786# -> Run, Last UP, Last DOWN

*#9998*837# -> Software Version

*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibrationactivated.

*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected

*#9998*872# -> Diag

*#9998*947# -> Reset On Fatal Error

*#9998*999# -> Last/Chk

*#9998*9266# -> Yann debug screen (=Debug Screens?)

*#9998*9999# -> Software version

*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)

*0002*?# -> unknown

*0003*?# -> unknown SP-unlock SGH-600 and SGH 2100

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! ) But also changes IMEI to 447967-89-400044-0

*2767*2878# -> Custom EEEPROM Reset These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600 type 8889 instead of 9998.

GSM MOTOROLA SECRET MOBILE CODES

Motorola

IMEI number: * # 0 6#
Net Monitor ON: * * * 1 1 3 * 1 * [OK]
Net Monitor OFF: * * * 1 1 3 * 1 * [OK]
* - press this until box shown up

To activate RBS:

(pause means the * key held in until box appears)

[pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]

You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.

To de-activate RBS,

[pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]

This only works with some versions of software. Please report what works and doesn't for you.

Reported working, by country:

d460: IT
6200 Flare: UK (Orange), AU
7500: IT (model: F16 HW: 5.2 SW: 2.1)
8200: ES, AU, NL, BE
8400: IT, NL
8700: AU, IT, SG, DE, ES, ZA
Uses of RBS:

Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.

SONY ERICSSON SECRET CODE

General Secrets

IMEI (International Mobile Equipment Identity): *#06#

Firmware Version: >*<<*<* Programming Checks: >*<<*<*> or >*<<*<*>


Accessing the phone without a SIM card: **04*0000*0000*0000# then on 'Wrong Pin' No


Reset English Menu: *#0000#


300, 600, 700 Series


Programming Menu (Short): 987 + >


Programming Menu (Long): 923885 + >


Field Test: 904090 + > (to exit 904090 + >)


Phone Test: 904059 + > (to exit 3 + <) Phone Reset: 904060 + >


CDMA Mode: 904093 + menu


Analog Mode: 904095 + menu DM mode 904959 + menu


GSM PHILIPS SECRET CODES

Philips GENIE


To view IMEI number *#06#

*#2254*# is the statusregister: C, BS, RR, MMI, CREAT.

*#2255*# will activate and deactivate the "DEBUG CALL"-Mode

*#2558*# will display the time in days,hours and minutes you are connected to the GSM network

To force a reconnection to the network, type : *#2562*#

To view and modify the Security Code of the phone, type: *#7489*#

To view some info about your SIM card like the phase level, the name, type: *#7378*#

To obtain information on SIM lock, Init and Flags, press: *#3377*#

To activate or deactivate Sleep Mode: *#7693*#

To get info about Sleep Mode: *#8463*#


Philips FIZZ
IMEI: *#06#

Lock Code: *#1234#

Software Version
To find software version, enter *#8377*#

The output will look something like:

Version : 0916 - EEPROM : 00000000-00 - TDA : 2445 - KISS : 0502 SIM-LCK

..or extended software version *#5644*#

output:

Version : 09162205 - EEPROM : 00000000-00 - TDA : 2445 - KISS : 0502 SIM-LCK

SM ALCATEL SECRET MOBILE CODES

ALCATEL

* # 0 6 # : IMEI number
* # 0 6 # : Software version
0 0 0 0 0 0 * : Net Monitor

PINOUTS AND CODES FOR PANASONIC MOBILES

Panasonic G500

IEMI:
To view IMEI number *#06#


--------------------------------------------------------------------------------

PINOUTS

1 - Ground
2 - TX_Audio
3 - Audio_Ground
4 - HF_ON (L=ON) -> L=H/F ON
5 - AOP_Sense <- Data Adaptor Select 6 - Serial_Up <- UART up (9600,33.8kbps) 7 - Serial_Down -> UART down
8 - External_Power <- POWER FOR CHARGING 9 - Ground 10 - RX_Audio 11 - Radio_Mute -> L=MUTE
12 - HF_Sense <- L=H/F MODE 13 - Reserved L=FLASH WRITE ENABLE 14 - Ignition <- H=ON 15 - Logic_Power -> H=HANDSET ON
16 - PAON -> Power Amplifier Control Signal.

************************************************** **
Nokia 3310 Secret codes
Jul, 08 2003 - 06:20
contributed by: mef
*#06# To find IMEI (International Mobile Equipment Identity)

*#7780# Restores Factory Settings..(Memory, language, counters not included)

*#3110# For checking the phone's software (SW) - called firmware revision information.

*#746025625# [*#sim0clock#] To check if the Sim-Clock can be Stopped (Sim-clock-stop is a kind of standby mode which will save battery time)

*#92702689# [*#war0anty#] Phone asks 'warranty code:'

6232 (OK) Displays the Month and Year of Manufacture

9268 (OK) Displays Serial Number

7332 (OK) Displays the date of the last repairment - if found

7832 (OK) Displays (if found) the date where the phone was purchased

37832 (OK) Set the Purchasing Date MMYY (This date can be set only once!)

87267 (OK) Transfers ALL phone numbers, Logo's, and ringtones from other gsm phones

Nokia 101 cell phone lockcode
Jul, 10 2000 - 02:35
Nokia 101 cell phones set up by Bell Mobility in Toronto can have their lock code circumvented by the following method:

Type: * 3001 # 12345 [STO] 00
Wait for: NOT DONE
Type: [RCL] 01


Clear old lock code (the last four digits) and enter a new lock code. Be very careful not to delete other characters.

Type: [STO] 01 [STO]
Turn power off.

Nokia 9000/9000i
Nov, 25 2000 - 22:41
To view IMEI number *#06#
To view Software Version enter *#8110# Latest Version is under Phone Info.
To view Week and Year of manufacture enter *#3283#

Samsung SGH-600 / SGH-2100
Secret Codes

*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0837# -> Show Software Version (instructions)
*#0001# -> Show Serial Parameters
*#9125# -> Activates the smiley when charging.

*#9998*228# -> Battery status (capacity, voltage, temperature)
*#9998*246# -> Program status
*#9998*289# -> Change Alarm Buzzer Frequency
*#9998*324# -> Debug screens
*#9998*364# -> Watchdog
*#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.
*#9998*427# -> Trace Watchdog
*#9998*523# -> Change LCD contrast - Only with version G60RL01W
*#9998*544# -> Jig detect
*#9998*636# -> Memory status
*#9998*746# -> SIM File Size
*#9998*778# -> SIM Service Table
*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error. *#9998*786# -> Run, Last UP, Last DOWN
*#9998*837# -> Software Version
*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.
*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected
*#9998*872# -> Diag
*#9998*947# -> Reset On Fatal Error
*#9998*999# -> Last/Chk

*#9998*9266# -> Yann debug screen (=Debug Screens?)
*#9998*9999# -> Software version

*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown

SP-unlock SGH-600 and SGH 2100

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )
But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the IMEI program found on the software page.

*2767*2878# -> Custom EEEPROM Reset

These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600

Samsung 811
Jul, 08 2000 - 01:24
47*869#08#9

- unlock code / change roaming code / ID

SIEMENS S1 / S3 / S3 COM / S4

To view the software date and else with S3 com, S4, S4Power
press with SIM removed *#06# and left softkey.

To view some other stuff with S4Power
press with SIM removed *#06# and left softkey twice.

To view the software date with S3 com, S4, S4Power
press with SIM installed menu 98 and left softkey twice.

ACTIVATE MONITOR MODE

Siemens S1/S3

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key),
5553756, HangUp Button (Red HandSet key)

Siemens S3 COM/S4

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button
(left MENU key), 7684666, HangUp Button (Red HandSet key)

Note: Now Monitor should appear at the bottom of the Network Options menu.

MONITOR MODE

Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Pressing the right Display Button when in monitor mode will show a
list of the six cells with the strongest signals.

Test Mode Indicators: (* = only available when call in progress )

CH Channel Number

RX Signal Strength (dB)

N NCC (Colour Code)

B BCC (Colour Code)

CI Cell ID (in Hex)

C1+ How long before phone does forced hand over.(see RX and RXAM)

LAI Location Area Identity. Display Network ID code(42F010 = 240.01) and MSC

TXPWR Transmit Power (dB)

RXAM Receive signal strength cut-off point

TS* Time Slot Number

TA* Timing Advance. Distance from tower in Km X 2

PL* Power Level
SIEMENS S1

Here's a trick to play Tetris, also known as Klotz on a Siemens S1.
Turn the phone on. Enter PIN. Before the telephone has logged in to the
your GSM net do the following steps.

1: Choose F 9 (function settings)
2: Choose send own number and push the right button for choose.
3: Push 9

USE 2 as <> , rotate the klotz with 5 and drop with 4.

I have just heard from one of the programmers of the phone that Tetris
was in the phone during development, but it was removed before it was produced.
Apparantly someone has the patent on games in mobile phones and Siemens
didn't want to pay the licensing fees. It was either in Menu F-9-9 or it's not there at all.

KODE RAHASIA HP KOMPLET GSM N CDMA

Kode2 rahasia hape, handphone.

BenQ-Siemens Secret Codes

Software version:
*#06#
to see more info, press softkey again
English menu:
*#0001#
Deutsch menu:
*#0049#

LG Secret Codes

LG all models test mode: Type 2945#*# on the main screen.
2945*#01*# Secret menu for LG
IMEI (ALL): *#06#
IMEI and SW (LG 510): *#07#
Software version (LG B1200): *8375#
Recount cheksum (LG B1200): *6861#
Factory test (B1200): #PWR 668
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#

Samsung Secret Codes

Software version: *#9999#
IMEI number: *#06#
Serial number: *#0001#
Battery status- Memory capacity : *#9998*246#
Debug screen: *#9998*324# – *#8999*324#
LCD kontrast: *#9998*523#

Motorola Secret Codes

IMEI number:
*#06#
Code to lock keys. Press together *7
Note: [] (pause) means the * key held in until box appears.
Select phone line – (use this to write things below the provider name):
[] [] [] 0 0 8 [] 1 []
Add phonebook to main menu:
[] [] [] 1 0 5 [] 1 []
Add messages to main menu:
[] […]

Sony Ericsson Secret Codes

Sony Ericsson Secret Menu: -> * <- <- * <- *
(-> means press joystick, arrow keys or jogdial to the right and <- means left.)
You’ll see phone model, software info, IMEI, configuration info, sim lock status, REAL time clock, total call time and text labels.
You can also test your phones services and hardware from this […]

Nokia Secret Codes

On the main screen type
*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
*#62209526# – Display the MAC address of the WLAN adapter. This is available only in the newer devices that supports WLAN […]

General Nokia 8810 Secrets Codes

IMEI number
*#06#
Software Version
*#0000#

more for nokia

*#4357#
Spelling out the word HELP you get customer service, kinda cool

more of nokia

On the main screen type

*#06# for checking the IMEI (International Mobile Equipment Identity).

*#7780# reset to factory settings.

*#67705646# This will clear the LCD display(operator logo).

*#0000# To view software version.

*#2820# Bluetooth device address.

*#746025625# Sim clock allowed status.

*#62209526# – Display the MAC address of the WLAN adapter. This is available only in the newer devices that supports WLAN like N80

#pw+1234567890+1# Shows if sim have restrictions.

*#92702689# – takes you to a secret menu where you may find some of the information below:

1. Displays Serial Number.

2. Displays the Month and Year of Manufacture

3. Displays (if there) the date where the phone was purchased (MMYY)

4. Displays the date of the last repair – if found (0000)

5. Shows life timer of phone (time passes since last start)

*#3370# – Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.

*#3370* – (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.

*#4720# – Half Rate Codec activation.

*#4720* – Half Rate Codec deactivation. The phone will automatically restart

If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345

Press *#3925538# to delete the contents and code of wallet.

*#7328748263373738# resets security code.

Default security code is 12345

Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin#

Change closed caller group (settings >security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.)

Press and hold “0″ on the main screen to open wap browser.

Nokia

NAM programm menu
*3001#12345#

More Benq stuff

*12022243121 is code for old Siemens model, like C35, M35 , S35 etc.
That code not working with BenQ-Siemens model.
Also you can change language in Siemens and BenQ-Siemens to any language( if you have that language support in mobile phone, of course) if you put between *# and # your country code with zeros before country code (zeros and counry code must have together four digits).
When you use code for language that not support language in mobile phones turn to automatic.
Examples:
*#0033# french
*#0385# croatian
*#0030# greek
*#0039# italien etc.

Here’s a couple of extras for you – apologies for any reposts

Alcatel

IMEI number: * # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *

Bosch

IMEI number: * # 0 6 #
Default Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 # #

Dancall

IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #
SIM card serial number: * # 9 9 9 4 #
Information about battery status: * # 9 9 9 0 #
Selftest (only Dancall HP2731): * # 9 9 9 7 #
Show version configuration: * # 9 9 9 8 #
Net Monitor: * # 9 9 9 3 #

Sony Ericsson

IMEI number: * # 0 6 #
Software version: > * < < * < *
Default Language: < 0 0 0 0 >
Enter to phone menu without SimCard – after Wrong PIN: press NO: * * 0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 #
Information about SIMLOCK: < * * <

Motorola

IMEI number: * # 0 6 #
Net Monitor ON: * * * 1 1 3 * 1 * [OK]
Net Monitor OFF: * * * 1 1 3 * 1 * [OK] * – press this until box shown up

Nokia

IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Lub * # 9 9 9 9 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 1
Network lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 2
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 3
SimCard lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 4 1234567890 -
MasterCode which is generated from IMEI *#92702689# [*#war0anty#] Warranty code.

Philips

IMEI number: * # 0 6 #
Simlock info: * # 8 3 7 7 #
Security code: * # 1 2 3 4 # (Fizz) or * # 7 4 8 9 #

Samsung (Most models)

IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #
Albo* # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Changing LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 #
Albo * # 0 2 4 6 #
Reset CUSTOM memory: * 2 7 6 7 * 2 8 7 8 #
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: * # 9 9 9 8 * 2 8 9 #
Vibra test: * # 9 9 9 8 * 8 4 2 #

Samsung (T100 Specific Codes)

Battery status (capacity, voltage, temperature): * # 8 9 9 9 * 2 2 8 #
Program status: * # 8 9 9 9 * 2 4 6 #
Change Alarm Buzzer Frequency: * # 8 9 9 9 * 2 8 9 #
Debug screens: * # 8 9 9 9 * 3 2 4 #
Watchdog: * # 8 9 9 9 * 3 6 4 #
EEPROM Error Stack: * # 8 9 9 9 * 3 7 7 #
Trace Watchdog: * # 8 9 9 9 * 4 2 7 #
Change LCD contrast: * # 8 9 9 9 * 5 2 3 #
Jig detect: * # 8 9 9 9 * 5 4 4 #
Memory status: * # 8 9 9 9 * 6 3 6 #
SIM File Size: * # 8 9 9 9 * 7 4 6 #
SIM Service Table: * # 8 9 9 9 * 7 7 8 #
RTK (Run Time Kernel) errors: * # 8 9 9 9 * 7 8 5 #
Run, Last UP, Last DOWN: * # 8 9 9 9 * 7 8 6 #
Software Version: * # 8 9 9 9 * 8 3 7 #
Test Vibrator: * # 8 9 9 9 * 8 4 2 #
Vocoder Reg: * # 8 9 9 9 * 8 6 2 #
Diag: * # 8 9 9 9 * 8 7 2 #
Reset On Fatal Error: * # 8 9 9 9 * 9 4 7 #
Last/Chk: * # 8 9 9 9 * 9 9 9 #9 9 * 9 9 9 #

Sagem

IMEI number: * # 0 6 #
Service Menu access: MENU 5 1 1 #

Siemens

IMEI number: * # 0 6 #
Software version: Take out SIM & enter: * # 0 6 # (& press LONG KEY)
Bonus screen: in phone book: + 1 2 0 2 2 2 4 3 1 2 1
Net Monitor (S4 Power):
Menu 9 8, left SoftKey, 7 6 8 4 6 6 6, Read phone, Menu 5 6

Sony

IMEI number: * # 0 6 #
Software version: * # 8 3 7 7 4 6 6 #
Show list of product creator names: + 1 2 0 2 2 2 4 3 1 2 1

SonyEricsson

IMEI number: * # 0 6 #
Software version: > * < < * < *
Default Language: < 0 0 0 0 >
Enter to phone menu without SimCard – after Wrong PIN: press NO: * * 0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 #
Information about SIMLOCK: < * * <

Code Description
*#06# Display the IMEI (GSM standard)
*#0000# Display the firmware version and date
*#bta0# Display the Bluetooth MAC address (models with build-in Bluetooth radio, activate first to show address)
*#mac0wlan# Display the WLAN MAC address (models with build-in Wi-fi radio)
*#opr0logo# Clear the operator logo (3310 and 3330 only)
*#pca0# Activate the GPRS PCCCH support (early GPRS models)
*#pcd0# Deactivate the GPRS PCCCH support (early GPRS models)
*#res0wallet# Reset the mobile wallet (models with mobile wallet)
*#res0# Soft-format the memory (Symbian models only)
*#rst0# Reset to factory defaults, confirmation required (DCT4 or newer)
*#sim0clock# Display the SIM clock status (DCT3 only)
*#ssn0# Display the manufacturing serial number (mid-range and premium, non-Symbian models, and those devired from them)
*#war0anty# Display the manufacturing and repair info (no exit on DCT3)
*efr0# Enable EFR encoding (pre-2003 models)
#efr0# Disable EFR encoding (pre-2003 models)
*hra0# Enable HR encoding (pre-2003 models)
#hra0# Disable HR encoding (pre-2003 models)
#pw+1234567890+n# Display the SIM lock status: (pre-2003 models)
n = 1: provider lock
n = 2: network lock
n = 3: country lock
n = 4: SIM lock
phannhatnghi is offline Add to phannhatnghi’s Reputation Report Post Reply With Quote

>>>>>>>>>> MOBILE UNLOCK CHEAT CODE <<<<<<<<<<
==============================================

Nokia

Code:

*#06# IMEI (International Mobile Equipment Identity) information
*#0000# 1st Line: software version. 2nd line: date of software release. 3rd line: phone type
*#746025625# Checks if the SIM clock can be stopped. It is a kind of standby mode that will save battery. However,

the clock automatically gets activated when the phone is switched off and on
*#92702689# Here is a big one! A menu will come up with six choices. First, it’ll display the serial number. Second,

the month and year of manufacture. Third, the date of purchase. Fourth, the last repair date. Fifth, the option to

transfer user data if you have the hardware for it. Sixth, the number of hours the phone has been on. Some of these

dates might not be displayed if the information doesn’t exist
*3370# Enhanced Full Rate (EFR) codec activation
#3370# EFR codec deactivation
*4370# Half Rate codec activation
#4730# Half Rate codec deactivation

EFR gives better voice quality compared to the half rate codec, but can cut down on the battery life. Your phone

will automatically restart after you feed in any of the above codecs

xx# Here is a harmless little one. This will automatically display the number at the ‘xx’ position in your phone book

Motorola

Code:

*#06# Displays IMEI
[][][] 119 [] 1 [] OK Enable EFR
[][][] 119 [] 0 [] OK Disable EFR

Samsung SGH-2100/600

Code:

*#06# Displays IMEI
*#9999# Software version
*#0324# Technical menu
*#0523# Lets you adjust the screen contrast
*#0228# Battery status (capacity, voltage, temperature

Sharp Secret Codes

*01763*8371# (*01763*VER0#) — Firmware Version.
*01763*3641# (*01763*ENG1#) — Enable Engineer Mode hold pwr key to leave then disable.
*01763*3640# (*01763*ENG0#) — Disable Engineer Mode.
*01763*8781# (*01763*TST1#) — Test #1 (test early wdt looping to dump, need to remove battery from phone)
*01763*8782# (*01763*TST2#) — Test #2 (test irq dis looping to switch, resets itself)

Kode Rahasia HP CDMA dan GSM.zip - 4shared

Kode Rahasia HP CDMA dan GSM

CDMA

–Samsung

Samsung sph-n240, n400, a460, a500, etc Nam Programming:
Nam Set: ##Spc
Test Mode: 47*869#1235
Debug Menu: ##33284,ok
Service Menu: Menu+8+0 (#889)
Reset (Life time, Clear Memory, etc): ##786,ok
A-key: ##2539,ok
Label Selection: ##3882,ok
Label(Home, Work, etc) : **523,ok
NGG Setting (Gateway, etc.): ##2769737,ok
Vocoder: ##8626337,ok
CAI Change: ##7738,ok
Enable TTY: ##889,ok

–Nokia

NAM set : 3001#12345# atau #626#7764726#
Software Version : #837# atau #0000#
ESN : #92772689#
Phone Restart : #75681# atau #75682#
Vocoder : #3872#
Debug Screen/EVRC : #8378#
Debug : #8380#
Field Test Menu : #83788#
To activate Net Monitor menu
type *3001#12345#
scroll to Field Test
enable (it says something about switching your phone off)
exit menus
turn off
switch on
menu
Net Monitor
Enter display/group code (eg 3101 for link info or […]
Nokia Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280
Programming:
Nam Set: *3001#12345#
Software Version: *#837#
Software Version: *#9999#
Esn Number: *#92772689#
Restart Phone: *#75681#
Restart Phone: *#75682#
Nokia 8887 Nam Programming:
Nam Set: *3001#12345#
Version: *#0000#
Evrc: *#8378#
Esn/Data/Timer: *#92772689#
SID: *#743#

–Ericsson (sebelum joint-venture dengan Sony dan berubah menjadi SE)

Programming Shot NAM : 987 + menu
Programming long NAM : 923885 + menu and enter
SPC : “0000”
CDMA mode : 904093 + menu
Analog Mode : 904095 + menu
DM Mode : 904959 + menu
–Sony (sebelum joint-venture dengan Ericsson dan berubah menjadi SE)
CM-M1300/3300/Z200
Programming : type “111111” and press JOG DIAL
Choose Programming and
Enter SPC : “000000”

–LG

LGC-300
Programming : menu + 9 and enter SPC:”000000”
A-key : press STO for sometime enter zone
Type 2539** and enter A-key
LGC-510 Programming : menu + 3 + 0 and enter SPC: “000000”
LGC-800W/500 : menu + 0 and enter SPC: “000000”
LGC-330W Programming : menu + 4 + 0 and enter SPC: “000000”
gc-300, etc Nam Programming:
Nam Set: Menu, 9, Spc
A-key: Press “Sto” 3sec, 2539**
lgc-330w, etc Nam Programming:
Nam Set: Menu, 4, 0, Spc
A-key: 2539**
lgc-510, v111, etc Nam Programming:
Nam Set: Menu, 3, 0, Spc
A-key: 2539**
lgc-500, 800w, etc Nam Programming:
Nam Set: Menu, 9 , 0, Spc
Debug Mode: Menu, 7, 0, Fsc
Debug Mode: Menu, 8, 0, Fsc
A-key: 2539**
Lg LX,VX-series, […]

–Motorola

Motorola 7760, 7860, 2260, 8160, etc Nam Programming:
Nam Set: Fcn,0000000000000, Rcl
Nam Set: 74663#, Fcn, Fcn
Test Mode: Fcn, 00**83786633, Sto
Motorola v60c, v120c etc Nam Programming:
Nam Set: 74663#, Menu, Menu, Spc
Nam Set: Menu, 073887, * (type quickly)
Test Mode: Menu, 073887*, Spc
Debug Mode: ##33284
Force the phone into DIGITAL ONLY mode:
1) ##33284 (Debug)
2) RIGHT Softkey (Next) Twice
3) Down […]
Star TAC 7760/7860
Programming : FCN + 0 + 000000 + 000000 + RCL
Test Mode : FCN 00*83786633 STO
V 60c Programming
Service Menu : 74663#menu (Programming Code)
Test Mode : Menu 073887*
Security Code : 000000

–Kyocera

Qualcomm qcp-800 Nam Pogramming:
Nam Set: Menu+3+0+Spc
Field Test: Menu+7+0+Fsc
Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming:
Nam Set: 111111+Jog Dial(Ok), Select “Programming”+Spc
CAI Change: ##7738,ok
Enable TTY: ##889,ok
Life Timer, PRL, etc: ##786,ok
A-key: ##2539,ok
A-key: 2539,ok
Tips:
On some kyocera handsets the factory service module has not been disabled
and the phone can be programmed without the spc by inputting.
Nam Set: ##333333 […]

–Sanyo

Sanyo 4900, 5150, 5300, 8100, etc Nam Programming:
Nam Set: ##Spc+Ok+Key Down+Ok
Advanced Setup: ##3282+Ok+Key Down+Ok+Msl
A-key: ##2539+Ok+Key Down+Ok
Version: ##**837+Ok+Key Down+Ok
Debug Menu: ##FSC+Ok+Key Down+Ok
Airtime menu: ##8463+Ok+Key Down+Ok
Change CAI: ##7738+Ok+Key Down+Ok
Vocoder: ##8626337+Ok+Key Down+Ok

Reverse Logistic: ##786+Ok+Key Down+Ok
Set IP Address: ##2769737+Ok+Key Down+Ok
TTY On/Off: ##889+Ok+Key Down+Ok
Ready Link: ##4636+Ok+Key Down+Ok
Browser Init On/Off: ##4682+Ok+Key Down+Ok
Picture Token: ##25327+Ok+Key Down+Ok
Unknown Code: ##5282277+Ok+Key Down+Ok
(SPC=000000, FSC=040793)

GSM

–SAMSUNG

Phone Lock : *2767*2878#
Phone Reset : *2767*3855#
Display IMEI : *#06#
Java Reset : *2767*5282#
WAP Reset : *2767*927#
Reset Media : *2767*63342#
Help Menu : *#9998*4357#
Java Menu : *#9998*5282#
Monitor Mode : *#9999#0#
Software Version : *#9999# or *#9998*9999#
Hardware Version : *#9999# or *#9998*8888#
Sim Info : *#9998*746# or *#0746#
Display Contras : *#9998*523# or *#0523#
Vibra On : *#9998*842# or *#0842#
Buzzer On : *#9998*289# or *#0289#
Baterry and field info : *#9998*288# or *#0288#
Error Log : *#9998*377# or *#0377#
Sim service table : *#9998*778# or *#0778#
Show date and alarm : *#9998*782# or *#0782#
Show network info : *#8999*638#
Change Operator Logo : *#8999*5646#
Production Number : *#9998*76#
View Melody Alarm : *#9998*968#
Non Volatile Memory : *#9998*585#
Digital Audio Interference off: *#3243948#
Digital Audio Interference : *#32436837#
Show Software Version : *#9999#
Intruction Software : *#0837#
Show Serial Parameter : *#0001#

–SONY

Display IMEI : *#06#
Unlock Code : *#7465625*12*xxxxxxxx#
Sim Code : *#7465625*XX*xxxxxxxx#
(untuk “XX”) adalah :
-NCK lock : 12
-Provider Lock : 22
-Network Lock : 32
-SIM Code Lock : 42
-Subset Lock : 52
-Corporate Lock : 62
-IMSI Personal : 72
-IMSI Range : 99

WAP Code : *#9275625*11*xxxxxxxx#
Changes Language : *#00xx# (“xx” Country Code)
Reset Language : *#0000000#
Display SIM lock Status : *#7465625#
Display Firmware Version : *#7353273#
Super Factory Reset : *#78737322867973738#
Reset Security Code : *#73287489263373738#
Turns PIN Code On : *09* (PIN Code)#
Turns PIN Code Off : #09* (PIN Code)#

–SONY ERICSSON

Display IMEI : *#06#
Lock Menu : <**<
Service Menu : >*<<*<*

–SHARP

Display IMEI : *#06#
Mep Lock Menu : *01763*6371#
Show Software Version : *01763*8371#

–NOKIA

Display IMEI : *#06# – *3001#12345#
Software Version : *#0000#
Sim Clock Stopping : *#746025625#
Display Info : *#92702689#
Activates Enhanced Full Rate : *3370#
Deactives : #3370#
Activates Enhanced HalfRate : *4370#
Deactives : #4370#
Bluetooth information : *#2820#
Enables GPRS pccch : *#7220#
Deletes Wallet (6310 test) : *#3925538#
Clear Operator Logo : *#67705646#
Software Reset : *#7370#

–PHILIPS

Display IMEI : *#06#
Status Register : *#2254#
Active/Deactive debug call : *#2255#
Time and Days : *#2558#
Active/Deactive Sleep Mode : *#7693#
Security Code : *#7489*#
Init, Flags, SIM CLK : *#3377*#
Name, Length, SIM Phase : *#7378*#
Philips Genie (TCD83 8 )
Active the beep signal and
Reconnected to the net : *#2337*#

–MITSUBISHI

Display IMEI : *#06#
Net Monitor 1 : hold*4329
Net Monitor 2 : hold*621342
M4 Test Mode : hold*5472
SW Version : hold*5806
HW Version : hold*5807
SW and HW Version : hold*936505
NS lock menu : hold*476989/*574243
CP lock menu : hold*482896
SP lock menu : hold*967678
IMSI lock menu : hold*362628
Lock net level : hold*787090/*787292
Shot down : hold*3926

–LG

IMEI (all) : *#06#
IMEI and SW (LG 510) : *#07#
SW Version (LG B1200) : *8375#
Recount checksum : *6861#
Factory Test : #PWR 668
Unknown (LG500) : 8060#*/9270#*/9278#*
Unknown (LG200) :*789# + send
Sim lock menu (LG B1200) : 1945#*5101#
Sim lock menu (LG 510W/
5200) : 2945#*5101#
Untuk LG 7020/7010 : 2945#*70001#
Untuk LG 500/600 : 2947#*

–MOTOROLA

Display IMEI : *#06#
SW and HW Version : *#300# + ok
Keypad test : *#301# + ok
Set English Language : *#303# + ok
Set Off engenering mode : *304# + ok
Set On : #304*19980722#
Location 1 : *#305# + ok
Engenering tes mode : *#307# + ok
Change phone code default : *#311# + ok
ADC call val : *#400# + ok
Contrast : *#402# + ok
Phone Code Default : 1234 + ok
Setting and Restore : *#0000# + ok
Master unlock code : 19980722 + ok

–ALCATEL

Display IMEI : *#06#
Meni 1 with SIM : 000000*
Reset full : ###847#
Add Barring Groups : ###765*02#
Locking to Network : ###765*05#
Unlocking from network : ###765*07#
Deactive Barring Groups : ###765*78#

–SAGEM

Display IMEI : *#06#
In Menu : *HOT MENU and Type Menu: -5-1-1-# + menu

kode rahasia hp china - Download from 4shared

Kode akses Nokia
*#30# : Menampilkan ‘private number’ yang menghubungi anda.
*#73# : Mereset timer ponsel dan skor game (pada beberapa ponsel).
*#7780# : Mengembalikan ke setting pabrik (factory setting).
*#2820# : Alamat IP perangkat Bluetooth (untuk ponsel yang mempunyai Bluetooth).
xx# : Akses cepat ke nama/nomer telepon di phone book ponsel, misalnya 20#.
Tombol off : Menekan dengan singkat, untuk berpindah antar profile.
*3370# : Mengaktifkan EFR(Enhanced Full Rate) Codec (tidak berlaku di ponsel Symbian).
#3370# : Menonaktifkan EFR Codec.
*#4270# : Mengaktifkan Half Rate Codec.
*#4270# : Menonaktifkan Half Rate Codec.
*#0000# : Menampilkan versi software ponsel.
*#9999# : Kode alternatif jika *#0000# tidak bekerja.
*#06# : Melihat nomor IMEI (Internasional Mobile Equipment Identity).
*#21# : Mengecek nomor pengalihan “All Call” yang digunakan.
*#2640# : Menampilkan kode keamanan ponsel yang digunakan.
*#43# : Mengecek status “Call Waiting”.
*#61# : Untuk mengecek nomor pemanggil yang dialihkan ketika tak anda jawab.
*#62# : Mengecek nomor pemanggil yang dialihkan ketika ponsel anda di luar jangkauan.
*#67# : Mengecek nomor pemanggil yang dialihkan ketika ponsel anda sedang sibuk.
**21*number# : Menghidupkan pengalihan “All Call” pada nomor yang diisi.
**61*number# : Menghidupkan pengalihan “No Reply” pada nomor yang diisi.
**67*number# : Menghidupkan pengalihan “On Bussy” pada nomor yang diisi.
*#67705646# : Mengganti logo operator logo pada Nokia 3310 dan 3330.
*#746025625# : Menampilkan status SIM Clock.
*#7760# : Menampilkan kode pabrikan (sebagian besar ponsel tipe lama).
*#92702689# : Memunculkan : 1. Serial Number, 2. Date Made, 3. Purchase Date, 4. Date of last repair, 5.Transfer user data. Keluar dari mode ini harus merestart ponsel ( pada beberapa ponsel ).

Kode akses Sony Ericsson :

*#06# : Melihat nomor IMEI (Internasional Mobile Equipment Identity).
*#0000# : Mereset bahasa kembali ke English.
> * < < * < * : Service Menu – menampilkan versi software ponsel. Tekan “Yes” berulang-ulang untuk melihat semua data software dan tekan “>” untuk melihat semua teks yang terdapat pada ponsel.
< * * < : Mengunci SIM Card.

Sortcuts :
1. Menyimpan nomor “Missed Call” di direktori ponsel.
Cari menu “Missed Call”, tekan “Yes” untuk menampilkan nomor yang dituju. Tekan nomor apa saja ( 0 sampai 9 ), kemudian tekan “clear” sekali untuk memblok nomor tersebut, kemudian tekan dan tahan “<” sampai muncul “Store”, tekan “Yes”.

2. Menyembunyikan nomor.
Setelah menekan nomor yang dituju dan sebelum menekan “Yes”, tekan ‘ > ‘ 2 kali untuk memilih “Hide Id?” dan tekan ‘Yes’.

3. Mengecek level batere ketika ponsel mati (off ).
Tekan ‘No’ secara cepat 1 x dan tunggu hingga tampilan baterai terlihat.

4. Menyimpan nomor di memori ponsel (bukan SIM Card).
Ikuti prosedur normal untuk menyimpan nomor. Ketika tampilan untuk menyimpan terlihat tekan ‘#’ sekali dan lokasi yang diinginkan, atau tekan ‘#’ 2 kali untuk melihat posisi lanjutan.

5. Menghubungi nomor dari pesan SMS.
Mengarahkan kursor pada nomor yang tertulis, kemudian tekan “Yes”.

Shortcut Penampilan Gambar :
(Berlaku di sebagian besar ponsel Symbian).
Ketika melihat image atau gambar di galeri, tekan :
1 : untuk memutar gambar ke kiri.
2 : untuk memutar gambar ke kanan.
5 atau 7 : untuk memperbesar (zoom) gambar.
* : untuk tampilan fullscreen atau non fullscreen.
Catatan : perintah angka di atas bisa berbeda di setiap ponsel.

Hard Reset :
Peringatan !!! Semua data ponsel akan hilang.
Dalam keadaan ponsel mati (off), tekan secara bersamaan tombol telepon (bicara), angka 3, dan tombol * (bintang). Kemudian dalam keadaan menekan ketiga tombol tersebut, tekan tombol On. Trik ini berlaku di sebagian besar ponselNokia.

Update Tambahan Nokia GSM
Nokia 21xx
Kode Penjelasan
*#06# Kode IMEI
*#3283# Minggu Produksi/Bulan & Tahun
*#9999# Versi Software

Nokia 32xx
Kode Penjelasan
*#06# Kode IMEI
*#0000# Versi Software
*#92702689# Menu Layanan
*#746025625# Sim Clock Stop
*3370# EFR aktif, suara lebih jernih, baterai cepat habis.
#3370# EFR inactive.
*4720# HR aktif, suara tidak lebih jernih, baterai tahan lama.
#4720# HR OFF.

Nokia 51xx
Kode Penjelasan
*#06# Kode IMEI
*#0000# Versi Software
*#92702689# Menu layanan
*3370# EFR aktif, suara lebih jernih, baterai cepat habis.
#3370# EFR inactive.
*4720# HR aktif, suara tidak lebih jernih, baterai tahan lama.
#4720# HR OFF.

Nokia 61xx
Kode Penjelasan
*#06# Kode IMEI
*#0000# Versi Software
*#92702689# Menu layanan
*3370# EFR aktif, suara lebih jernih, baterai cepat habis.
#3370# EFR inactive.

Nokia 81xx
Kode Penjelasan
*#06# Kode IMEI
*#8110# Versi Software, tanggal produksi & nomor model
*#92702689# Menu layanan

Nokia 88xx
Kode Penjelasan
*#06# Kode IMEI
*#0000# Versi Software
*#92702689# Menu Layanan
*3370# EFR aktif, suara lebih jernih, baterai cepat habis.
#3370# EFR inactive.

Nokia 90xx
Kode Penjelasan
*#06# Kode IMEI
*#6823711
58412125# Versi Software
*#3283# Tanggal Produksi

Design by infinityskins.blogspot.com 2007-2008